SAS Nut Lock - Medium Strength - 10ml

Nutlock threadlocker is designed to replace nylon locknuts, deformed threads, star and spring washers etc. for all general purpose threadlocking. The medium strength formulation means only ordinary spanners are required to undo fasteners.

The main benefit of nutlock is that it coverts any threaded fasteners to locking fasteners, protecting the thread against corrosion and leaks. It also allows threaded parts to be reused and can be directly applied onto parts applied with protective oils and films or where contamination from surrounding parts is a problem.

Technical Specifications:

• Resin: Mod Methacrylate

• Colour: Blue Thixotropic

• Cure Speed: <15 mins @ 20°C (fully cured in 24 hours)

• Viscosity: 1200-1800 thixotropic

• Gap Fill: 0.1mm

• Flash Point: >85°C

• Typical Breakaway Strength: 19N/mm²

• Typical Prevailing Strength: 8-10N/mm²

• Max Operating Temp: -55 to +150°C