WURTH REPLAST® ME - Universal - 2C Plastic Repair FAST 90 Second Adhesive - 50ml
WURTH REPLAST® ME - Universal - 2C Plastic Repair FAST Adhesive - 50ml
Our Replast products featuring the EMICODE label are low emission/environmentally compatible. The EMICODE classification system awards labels to construction products that comply with the very stringent health and environmental requirements of recognised institutes.
2C adhesive for repairing and connecting plastic parts
An adhesive for virtually every type of plastic
Easy to handle various adhesive types
Can be used for repairs and structural bonding
Certified in accordance with NSF P1 and EMICODE EC1+
Special shorter positive mixer
Optimum mixing with minimum volumes
Little adhesive wastage
Repair compound cures quickly, is flexible and can be sanded in a very short amount of time
Excellent chemical resistance to a range of liquids, such as petrol, a large number of lubricating oils and ethyl acetate
Notice
Not suitable for PE (polyethylene), PP (polypropylene) or PTFE (polytetrafluoroethylene). There may be adhesion problems in individual cases due to the coatings and release agents used in some cases in the plastic production process. Check material compatibility on a non-visible area if necessary.
Solvent Free based
An adhesive for virtually every type of plastic.
No need for inconvenient use of different types of adhesive.
Can be used for repairs and structural bonding.
Special positive mixer.
Optimum mixing with minimum volumes.
Low adhesive loss (waste).
Quick to harden
Further work, such as sanding, is possible within an extremely short period of time.
Processing time
Within 90 s (at 23 °C).
Can be sanded and painted after 10 min.
Excellent chemical resistance
Resistant to a wide range of liquids, such as petrol, many lubricating oils and ethyl acetate
Food Safe
NSF certified sealants & adhesives are food safe sealants, meaning they do not cause food borne illnesses when they come into contact with food and/or drinks
Application area
For easy repair and connection of plastic parts such as spoilers, radiator grilles, trim clips, brackets on headlights, aprons, bumpers, wheel arches, etc. Suitable for use in the food industry (NSF P1)
Instructions
The substrate must be capable of bearing loads and must be clean, dry and free from grease and rust. Old adhesive residues must also be removed. Observe the processing instructions. For more information, refer to the technical data sheet.
Application Information
The substrate must be capable of bearing loads and must be clean, dry and free from grease and rust. Old adhesive residues must also be removed. To do so, clean the surface with the plastic cleaner and apply the plastic primer. The flash-off time must be observed. Discard some adhesive before screwing on the mixer nozzle. The first 2 cm of adhesive from the mixer nozzle should also not be used. When applying the adhesive, the mixer should remain in the adhesive to prevent bubbles forming. Observe the processing instructions. The processing temperature must be between +15°C and +25°C.
Qty : 1 Kit
