PR214_-_Blind_Rivets_POP_AVDEL_480x384.jpg

POP AVDEL Blind Rivets - Standard Flange - 6.4 x 19.5mm (500 Pack)

£10.50

Quantity:
Add To Cart

POP AVDEL standard flange blind rivets are mainly used in applications where there is no access to the rear (blind side) of the joint.

Installing a blind rivet is a simple and fast process which is what gives POP rivets their excellent reputation.

Drill a correctly sized hole into your materials where you want your rivets.

Place the Rivet Installation Tool on the mandrel of the rivet.

Activate the tool (usually by some lever or trigger mechanism) to pull the mandrel towards the surface.

When the mandrel gets tight in the material it will snap off at a predetermined point leaving the "hat" with a portion of the mandrel stuck inside. A properly sized and installed blind rivet will hold tightly and strong as a permanent joint in the materials. If the hole was too big the rivet will be loose and spin and if the drilled hole is too small the rivet will not install correctly leaving a bad seal.

Technical Specifications:

Material: Aluminium

You Might Also Like

Multigrip Rivets - Standard Flange - Choose Size
Multigrip Rivets - Standard Flange - Choose Size
from £16.62
Sealed Type Rivets (Closed End) - (100) - Choose Size
Sealed Type Rivets (Closed End) - (100) - Choose Size
from £4.55
Body Trim Rivets -FIX207
Body Trim Rivets -FIX207
£29.89
Black Rivets - Large Flange (100 Pack) - Choose Size
Black Rivets - Large Flange (100 Pack) - Choose Size
from £5.91
Steel Rivets - Standard Flange - Choose Size
Steel Rivets - Standard Flange - Choose Size
from £5.21